Digital Dehumidifier 20L 1329FL

If your appliance is not collecting water, make sure the dust filter is clean and that there is moisture in the air. If these conditions are met and the problem persists, you should contact an Authorized Flama Technical Assistance Center.

First, remove the plastic cover from the back of your dehumidifier, then carefully remove the filter. Clean the filter with a vacuum cleaner using clean water and let it dry.

When operating, the appliance draws in moisture from the air, removing the dust particles it contains through a filter. The air is then transported through a refrigerated evaporator that operates at very low temperatures. At this point, the moisture condenses into drops of water, which are collected in a reservoir. The cool, dry (dehumidified) air is then passed through the condenser, which operates at a warm temperature to heat the air before it returns to the room. This results in warm, dry, filtered air in the home.

If your appliance automatically stops dehumidifying, check whether the water tank is full or whether the room temperature is too low or too high. If the problem persists, contact an Authorised Flama Service Centre.

The average lifespan is 6 months, but it depends on the location and the amount of indoor air pollutants. Therefore, you should stay alert and try to determine, for example, whether the warm air released by the device has any unpleasant odor.

Yes. It is normal for the equipment to release air that is slightly warmer than the ambient temperature when it is operating. The dehumidifier is not an air conditioner and does not produce cold air.

Check that the device is properly connected. If it is, it may have shut off for safety reasons. In that case, clean it and make sure it is in perfect condition before turning it back on.