SteamUltra AnodizedPlate Steam Iron 3050W Black 5398FL

There are several possible causes:

• You are not using the correct type of water;
• You used a starch-based product on the clothes;
• Charred clothing fibers have become trapped in the iron's holes;
• The clothes were not rinsed properly and still contain detergent.

The automatic cleaning function cleans the inside of the base, removing impurities. It is recommended to use this function periodically.

To avoid damaging the soleplate of the iron, follow these recommendations:

• Always place the iron on the rest or base (depending on the model);
• Avoid ironing over abrasive items (buttons, zippers, etc.);
• Never clean the soleplate with abrasive or metal materials.
  
  

No, let the steam iron cool down before storing it and follow these recommendations: empty any remaining water from the tank, turn the thermostat back to the minimum setting, switch off the steam control, and store it on the base or place it on the base (depending on the model).

It is essential to select the correct temperature for ironing. The iron has a built-in thermostat that controls the temperature very precisely across the entire soleplate. The thermostat features internationally recognized dot markings corresponding to three temperatures suitable for ironing. Make sure you are using the correct temperature for the garment you are ironing.

Shine appears on some fabrics, especially dark-colored fabrics.

We recommend ironing dark-colored clothes inside out and at the correct temperature. If you are ironing blended fabrics, set the temperature for the most delicate fiber. 

Important: the iron takes longer to cool down than to heat up. We recommend starting with fabrics that should be ironed at a low temperature.

Do not use the steam button continuously. Wait a few seconds between each use. The temperature control must be set to the steam zone. Use the steam function only when the iron is hot (the light should be off).

This function allows you to iron garments in place or while they are hanging on hangers. To do this, set the iron’s temperature control to the maximum position. Leave the garment on a hanger and gently hold the fabric with one hand. Press the steam button intermittently and move the iron from top to bottom. Never use the vertical steam function on a garment being worn.

See also our range of vertical steam irons.

If the iron has not been used for a long period (for example, several weeks), you should turn it on over the sink for a few minutes to remove any residue that could stain clothing.

No. The steam iron should always be switched off before filling the tank.

The appliance is designed to operate with tap water. If the water hardness levels are very high, mix 50% tap water with 50% distilled water. Do not use rainwater, water with additives, or demineralized or distilled water. These contain organic residues and minerals that accumulate under the influence of heat and cause splashing, brownish stains, or premature wear of the appliance.